|
Post by breezer on Mar 29, 2009 19:21:39 GMT
...engine stand today for Hank with the last of my scrap steel. (he may post a photo of it later on)
Welding is getting better, however I need to keep practicing. I was considering buying some better quality steel to make some more and selling them to forum members at pretty much cost price. This would be £20 + postage (which I would imagine should come in at £5 or under)
Just want to gauge interest before I fork out on a load of box section!!!!
Hank - this is where you step in and offer pictures and an honest appraisal of the stand you received today...
Drop myself a pm if you are interested
|
|
|
Post by hank on Mar 29, 2009 20:47:56 GMT
|
|
|
Post by breezer on Mar 29, 2009 20:50:39 GMT
Excellent!!!!
Also if anyone has any sundance grips surplus to requirement let me know as these can be turned into excellent crank pullers / bearing drifts!
|
|
|
Post by Juan on Mar 29, 2009 21:02:12 GMT
Looks alright that Jim, I'd have had one if I didn't already have a bench mounted swivel job.
|
|
|
Post by stewart on Mar 29, 2009 21:05:40 GMT
Wouldn't mind one of those stands that lift the back end off the ground like racing scoots have
|
|
|
Post by madmax on Mar 29, 2009 21:06:03 GMT
Nice job Jim, your welding is getting better. ;D
|
|
|
Post by stewart on Mar 29, 2009 21:12:10 GMT
forgot to say your weldings is looking good n solid jim
|
|
|
Post by breezer on Mar 29, 2009 21:49:25 GMT
Cheers lads - every 5 compliments & the price goes up a tenner... Discovered the problem before was I was trying to seam weld it and the metal was too thin, so it was blowing holes. Tried stitch welding this one (on 1 sec, off 1 sec, on 1 sec etc) and it was much better. Stewart - you got any pictures?
|
|
|
Post by madmax on Mar 29, 2009 22:15:02 GMT
Cheers lads - every 5 compliments & the price goes up a tenner... It looks crap Jim! ;D ;D ;D
|
|
|
Post by breezer on Mar 29, 2009 22:22:37 GMT
that's more like it! ;D
|
|
|
Post by stewart on Mar 30, 2009 1:45:29 GMT
Cheers lads - every 5 compliments & the price goes up a tenner... Discovered the problem before was I was trying to seam weld it and the metal was too thin, so it was blowing holes. Tried stitch welding this one (on 1 sec, off 1 sec, on 1 sec etc) and it was much better. Stewart - you got any pictures? no think one of the smallframes had one at the scootering dyno, it has like a bar on it for leverage I suppose
|
|
|
Post by breezer on Mar 30, 2009 6:29:14 GMT
Yeah that lifts the front wheel. It's for bikes that don't have a stand.
that was Tony O'Bs bike. the Green Hornet
|
|
|
Post by madmax on Mar 30, 2009 6:42:13 GMT
Here it is...and the stand: Hope you don't mind Tony.
|
|
|
Post by breezer on Mar 30, 2009 6:47:38 GMT
ooops apologies! Only pictures I had show it lifting the front wheel!
|
|
|
Post by vinrouge on Mar 30, 2009 16:06:02 GMT
Nice job there Jim,
I assume the wife's still looking for the clothes prop ;D
|
|
|
Post by breezer on Mar 30, 2009 16:10:11 GMT
;D
|
|
|
Post by vinrouge on Apr 22, 2009 20:29:25 GMT
Cheers Jim, just the job ;D
|
|
|
Post by breezer on Apr 22, 2009 22:28:20 GMT
Brilliant - cheers mate!
|
|