|
Post by Juan on Mar 21, 2009 16:23:54 GMT
Bought a replacement floorpan off Resurrection Scooters on the 22nd of Febuary and it arrived today after being posted on the 19th of March. Anyway, I've now got it so I'll go no further with that line for the time being. I've just offered it up to the Racer chassis and in no way is it for "all smallframes" as advertised, it's only going to fit the SS or Nuovo frame without too many modifications. I'm going to use it as my welder will work around it and it's for the daughters XL which is just going to be a shitter anyway. The one thing that did pleasantly surprise me was that the struts are included and prefitted. Just a word of warning to you if buying from them and ask questions of Beedspeed ref. dimentions if you're ever buying one off them. I'm assuming they come from the same source.
|
|
|
Post by madmax on Mar 21, 2009 16:40:34 GMT
I've bought one from beedspeed to fit to the primmy but didn't use it in the end. I didn't check if it fits though. I better have a look as I want to use it for my 50spesh. Thanks Juan.
|
|
|
Post by Juan on Mar 21, 2009 17:20:52 GMT
Yeah, it'll need extra material adding to the rear of the spine at least if it's the same as mine Max. The one I've got looks like the cable hole and rear brake fixing point have been hacked out with tinsnips although the quality and thickness of the steel seems reasonable enough. Oh, forgot to say I bought it through ebay. I've left neautral feedback as I didn't feel it was bad enough to neg them even though I e-mailed them a few weeks ago asking where it was but received the rubber ear from them.
|
|
|
Post by madmax on Mar 22, 2009 10:33:40 GMT
Just checked mine Juan and its fine.
|
|
|
Post by Juan on Mar 22, 2009 11:54:40 GMT
Good to hear Max. Just went and picked up the XL, forgot that they had a totally redesigned floorpan so I'm happy that the one I've got is going to work well on it. I might take pictures later on just for you Max. ;D
|
|
|
Post by madmax on Mar 22, 2009 12:20:53 GMT
Cheers Juan, you're too kind. ;D
|
|
|
Post by Juan on Apr 5, 2009 16:10:53 GMT
Got around to uploading some photos today. Racer floor. Racer floor with replacement pan layed on. XL floor. XL floor with replacement pan layed on. Going to need some grinder action once Totti's done his stuff. ;D
|
|
|
Post by breezer on Apr 5, 2009 16:30:27 GMT
which website have you stolen those photos from Juan?
I can't believe there's any scooter project action going on at Kerr Castle... ;D
|
|
|
Post by sugarlump on Apr 5, 2009 16:48:57 GMT
|
|
|
Post by breezer on Apr 5, 2009 16:57:01 GMT
are those little welding clamps magnetic Ben?
|
|
|
Post by sugarlump on Apr 5, 2009 17:02:58 GMT
No mate, them's the intergrips i posted on scooterotica, useful fings they are too. I find magnets mess with the welding arc
|
|
|
Post by Juan on Apr 5, 2009 17:31:18 GMT
which website have you stolen those photos from Juan? I can't believe there's any scooter project action going on at Kerr Castle... ;D Twat. ;D Dunno Ben, I was on Beedspeed ordering some bits this morning and noticed they offer 2 floorpans, the SS one and a V range one which ties in with Max's findings. Reckon I've a bit of pissing about to do with it to get the Leo Vince Secsys to work though.
|
|
|
Post by madmax on Apr 5, 2009 17:35:58 GMT
Hurray, finally some pics boss! I was beginning to think that I would never see any! ;D
|
|
|
Post by breezer on Apr 5, 2009 17:57:47 GMT
Thanks ben - that diagram shows how they work! I didn't realise they fitted under the workpiece - hence why I thought they were magnetic.
look to be quite handy things - may have to invest
|
|
|
Post by timelord on Apr 5, 2009 19:11:53 GMT
mine was the same but got it fitting ok now
|
|
|
Post by sugarlump on Apr 5, 2009 19:57:50 GMT
Dunno Ben, I was on Beedspeed ordering some bits this morning and noticed they offer 2 floorpans, the SS one and a V range one which ties in with Max's findings. Looks like the same pic to me on beedies ;D My conspiricy is they all eminate from scootrs and they only sell one type of smallframe pan. Anyway i'd just love to have an ss90 even if it needed a new floor Jim - intergrips are worth the money mate, saves messing with clamping tricky bits of sheet, keeps it all in place whilst it's hot to minimize warping plus it keeps a nice 1mm gap which is perfect for butt welds. I don't work for frosts either
|
|
|
Post by Juan on Apr 6, 2009 17:37:14 GMT
Yeah, probably.
A bloke I know from another forum has said the ones advertised as for GS's need huge reworking to get anywhere close to fitting.
|
|