dave
50 Special
Posts: 28
|
Post by dave on Feb 23, 2009 20:09:53 GMT
Bought as a PK50 frame and a box with all the other bits as a project, but want it on the road before the summer Plan is for a lightly ported DR130 built by Ash, 125 primary's, leccy ignition, etc, open to suggestions on the exhaust. Frame off to the blasters next week and more pics to follow
|
|
|
Post by madmax on Feb 23, 2009 20:37:04 GMT
A polini snail or a leovince would work fine with your set up mate.
|
|
|
Post by spellcheck on Feb 25, 2009 15:39:13 GMT
|
|
dave
50 Special
Posts: 28
|
Post by dave on Mar 7, 2009 13:28:02 GMT
Change of plan for the engine. Polini 130 kit with the casings matched, and I've found a Leo Vinci exhaust. What do you reckon for the crank, carb, gearing etc. Don't want an out and out screamer, just a torquey quick motor capable of p1ssing off one or two of the kitted large frame riders in our club
Pics of painted frame to follow soon
|
|
|
Post by swallow on Mar 7, 2009 14:31:27 GMT
Change of plan for the engine. Polini 130 kit with the casings matched, and I've found a Leo Vinci exhaust. What do you reckon for the crank, carb, gearing etc. Don't want an out and out screamer, just a torquey quick motor capable of p1ssing off one or two of the kitted large frame riders in our club Pics of painted frame to follow soon simply having a smallie should suffice as your large arsed companions realise what a beauty you've got
|
|
dave
50 Special
Posts: 28
|
Post by dave on Mar 7, 2009 15:11:00 GMT
simply having a smallie should suffice as your large arsed companions realise what a beauty you've got[/quote] ;D ;D ;D ;D ;D
|
|
|
Post by madmax on Mar 7, 2009 16:20:48 GMT
Change of plan for the engine. Polini 130 kit with the casings matched, and I've found a Leo Vinci exhaust. What do you reckon for the crank, carb, gearing etc. Don't want an out and out screamer, just a torquey quick motor capable of p1ssing off one or two of the kitted large frame riders in our club Pics of painted frame to follow soon Mazzucchelli crank 27/69 primaries 24mm dell'orto carb. ;D
|
|
ash
Automatica
Posts: 0
|
Post by ash on Mar 7, 2009 16:23:05 GMT
Change of plan for the engine. Polini 130 kit with the casings matched, and I've found a Leo Vinci exhaust. What do you reckon for the crank, carb, gearing etc. Don't want an out and out screamer, just a torquey quick motor capable of p1ssing off one or two of the kitted large frame riders in our club Pics of painted frame to follow soon mazzy crank, 24/25mm carb rotary/or reed, 27/69 primary should be a good setup
|
|