|
Post by henri on Nov 25, 2021 6:47:12 GMT
i used the bearings reccomended by max quattrini on the crank , also i rarely use the 2 piece bearings generally for a few reasons . biggest reason is cost i guess ,but theres also the extra axial support of the crank being held both sides .my thinking is the fly side holding it too takes some loading off the clutch side bearing .on the m200 a 2 piece fly side bearing would be a "speciality" order ,very expensive an very hard to find .as is the skf c4 high rpm polymide cage bearings are £27 an not generally held by many bearing suppliers .i usually stick with koyo bearings but SKF were the only brand i could find in the particular size this crank/cases takes .H
|
|