|
Post by grimmripper on Apr 18, 2021 8:43:00 GMT
I have fitted the kit but are suffering form overheating runaway revs etc.
I am about to pull the engine and do a pressure test but I am thinking that I did not fit the copper head gasket that came with the kit as I thought it was an optional extra to lower the squish. The Malossi head does not have an o-ring like I am used to.
Can anyone confirm if the copper gasket is to be fitted as standard???
Cheers
MattO
|
|
|
Post by tzsteve on Apr 19, 2021 16:40:28 GMT
if you do not want to use the gasket
use some loktite but only a little and only on the gasket face
when doing a strip down it can easily be removed with paint stripper as long as its none caustic
|
|
|
Post by grimmripper on Apr 19, 2021 22:23:14 GMT
Thanks Steve
I have a friend who is a Loctite rep.
What is the Loctite number that you would recommend? Ill see if he can get me some samples!!!
Cheers
MattO
|
|
|
Post by tzsteve on Apr 20, 2021 18:18:07 GMT
one of the gap filling ones such as a bearing grade.
i have used all sorts but 641 was the last one i used
they are all oil and petrol safe and have good heat resistance
|
|