|
Post by rhys on Oct 8, 2020 9:13:49 GMT
Does anyone know if you can fit a non Polini piston in a Polini Evo Reed kit? Piston is 57 (56.945) must have single ring with peg directly opposite exhaust port above the inlet cut out. Compression height I can adjust within a few millimeters with packing.
|
|
|
Post by jonnysnatchsniffer on Apr 1, 2021 21:25:26 GMT
yes gran sport do them, with 2 different compression heights which can be quite handy
|
|
|
Post by tzsteve on Apr 5, 2021 9:05:36 GMT
KH400 piston, the work horse of the 70`s and 80`s. just run the top ring
|
|
|
Post by rhys on Apr 6, 2021 11:23:14 GMT
I put a standard Polini two ring piston in it in the end and it fitted fine, pegs run between transfers and boost port and bottom ring is just above inlet port at BDC.
|
|
|
Post by tzsteve on Apr 7, 2021 14:37:19 GMT
success
|
|