|
Post by simonpk125 on Sept 24, 2020 8:00:01 GMT
Hi I have just bought a pk 125 with saggy suspension I bought a rear shock absorber and was also sent a Rear Shock Top Rubber Mount and a Rear Shock Top Distance Nut - Short Looking underneath my scooter the shock top bolt goes straight through the body No sign of a rubber mount or a distance nut I can’t find a decent diagram of the assembly anywhere on line Can any on help Si
|
|
|
Post by movin64 on Sept 24, 2020 9:04:49 GMT
The rubber goes on top of shock then the bolt on the rubber mount goes through the frame, well that's how it is on a px, so I assume that it will be the same on a pk
|
|
|
Post by willspeed on Sept 26, 2020 1:08:54 GMT
No need for a rubber on the PK, these are for PX only, sandwich a circular rubber between the frame and the 'Cup' (tank side) put the washer on and a nut, bing bang bosh. Shock absorber
|
|
|
Post by simonpk125 on Sept 26, 2020 6:05:36 GMT
Cheers for the quick reply’s I think You’re right although Beedsp... argued the toss The thread in the rubber is definitely not the same as top of the shock. It is loose... I was told to use loctite! I’m not comfortable with that . If I did fit the rubber block as is I’d rather weld it on! I’m going to fit it without the rubber I think Cheers for reply’s Simon
|
|