|
Post by jellerby232 on Jul 5, 2020 17:18:58 GMT
Anybody have the tool for building the clutch inside the engine? No BGM ones, can’t find a Crimaz tool anywhere. Anybody have one?
|
|
|
Post by nickj on Jul 5, 2020 22:00:20 GMT
Assuming you mean the tool to compress the springs in the clutch u can make one like the one SIP sell from a piece of tube, an old bearing, a clutch puller and a bolt. You need to weld the bearing on to the tube
|
|
|
Post by henri on Jul 6, 2020 6:42:26 GMT
i just use a clutch centre puller an large socket ,or on bgm's a flywheel puller an socket .H
|
|
|
Post by rhys on Jul 6, 2020 8:30:19 GMT
You just need to make sure the bolt doesn't bottom out on the end of the Christmas tree before you compress it enough to get the clip on.
|
|
|
Post by jonnysnatchsniffer on Jul 14, 2020 14:06:18 GMT
yes i have one in my hand funnily enough
|
|