just wanted to introduce myself, Ronny Oliver coming out of California. long time reader, first time posting. I have been involved in scooters since the late 80s but this will be my first go around with small frames. I used to host fastlambrettas.com and lambrettas were my thing and only thing I would ride for many years. after a bit of a hiatus from many things in life I'm back. Currently finishing up a cutdown street racer, and then onto a primavera 125. I am sure I will be on here searching for a few missing bits and probably advice as well. in the near future I will be welding up a small frame to fit a yz 125 motor but that is down the road, I sometimes get a head of myself with projects, but I am just about done with the cutdown. The primary missing parts from the 125 seem to be the gear cluster, flywheel and ignition, exhaust, and headset shifter and tubes. I have all new seals, clutch, bearings and pretty much everything else boxed up and ready to go. I will be more than likely using a polini kit which has been highly tuned and by Hotrod Al, and still undecided on the rest.
Welcome Ronny...nice friendly place with lots of old hands who can diagnose a problem from a rubbish online description. The archive is a goldmine of info that has every answer u need...and load up some pics!