|
Post by elflapo on Sept 2, 2019 14:10:20 GMT
Afternoon all. Ice been having a deep clean of the 50 I picked up a few weeks ago. Took off the cylinder head and cylinder and managed to break both the piston rings being a bit too heavy handed when cleaning. Lesson learned there.
I have been looking on line for replacements but can't figure out which ones I need. Sip has different variations for 38mm piston. The old ones are pictured measuring 1.7mm wide though my cheap ass caliper may be wrong. Anyone know the code for the size I need please?
|
|
|
Post by henri on Sept 2, 2019 18:50:36 GMT
there 38 x 2 mm if a standard piston an bore , the other ones sip hold will be for a 50sr an pk50 xl rush , an chromed rings for the ali barrel 50cc . H
|
|
|
Post by elflapo on Sept 2, 2019 19:49:28 GMT
Cheers. Yeah looks standard. Nobody has touched it to be fair. So 38 x 2mm should do it?
|
|