Any chance of a thread sticky where we can share pictures and ideas of what we have created/made/basterdised bits for our smallys to make them unique or for performance purposes. I know a few people who have created some spanking work on here. I'd just like to see other people's ideas and share some of my own and such.
Ayup trussy, once I've run it in ill be bringing it back up to get it on the dyno in bretts work, got a few other special parts I'm working on at the minute aswel so should finish them possibly before crimbo or in Jan.
MNV-3K-M5 Needle valve M5 x 0.8 to 1/8" ID hose fitting (x2)
Plus some 3mm O/D brass tubing 2mm I/D (you can get lengths of this from evilbay.
You'll also need some petrol resistant pipe for the connections and a good M5 tap.
Also some good quality fittings solder and flux. Here's some photos of the clippard parts. It took me ages to work out from photos how they were made and eventually found a uk stockist for the US supplied parts. If you take your time and are careful you'll have a great item. We managed to get an extra 1hp out of my S1 with the powerjet allowing a smaller main jet. Had one on my smally for two years.