|
Post by stewart on Oct 21, 2008 16:59:22 GMT
...get a px single saddle to fit a pk? first thought was just to weld it to the pk seat bracket but i'm lost any ideas?
|
|
|
Post by breezer on Oct 21, 2008 17:33:14 GMT
What saddle is it - have you got a photo?
|
|
|
Post by gp200 on Oct 21, 2008 18:12:28 GMT
don't you need a petrol tank with the nuts/plate made in to it so you can bolt the seat to the tank ,i have a v90 petrol tank with the nuts in,not sure if a v90 tank is the same as a pk tank !!!
|
|
|
Post by madmax on Oct 21, 2008 18:54:01 GMT
i have a v90 petrol tank with the nuts in,not sure if a v90 tank is the same as a pk tank !!! pk tank is different from v90.
|
|
|
Post by MiNiKiN on Oct 22, 2008 13:21:33 GMT
why not get at least a v50/v90 saddle seat? suppose fitting is easier compared to px type
|
|
|
Post by stewart on Oct 22, 2008 13:51:11 GMT
|
|
|
Post by gp200 on Oct 22, 2008 15:48:35 GMT
|
|
|
Post by stewart on Oct 22, 2008 17:03:10 GMT
so its down to use pk seat bracket or getting a piece of 5mm stell with holes in to match new seat base i don't mind losing the wee toolbox ;D
|
|
|
Post by 225worb on Oct 22, 2008 18:49:45 GMT
Not trying to be neagtive ......BUT the two bolts holding the bracket may be ok but the bracket should really go back to the fuel tank for strength .....And you may find that because the seat seats so far foreward that your knees will hit the headset ...
|
|
|
Post by sugarlump on Oct 22, 2008 21:01:56 GMT
If you get this month's copy of scootering there's a young lad with an orange smallframe which has the seat/bracket arrangement you're looking for. Quote - "a Lammy LD seat remounted on a home-made plate".
Looks good.
|
|
|
Post by hank on Oct 22, 2008 22:43:46 GMT
If you get this month's copy of scootering there's a young lad with an orange smallframe which has the seat/bracket arrangement you're looking for. Quote - "a Lammy LD seat remounted on a home-made plate". Looks good. really like that one and in particular the seat - would worry a bit that you can't sit far back enough for us with long legs though. £900 total cost - bollocks! ;D maybe it helps with his dad welding and spraying it?
|
|
|
Post by stewart on Oct 23, 2008 5:58:40 GMT
I'm only 5'6'' biggest fear is reaching the ground ;D
|
|
|
Post by hank on Oct 23, 2008 9:58:30 GMT
I'm only 5'6'' biggest fear is reaching the ground ;D you could grow your hair "big" like Max to compensate? ;D
|
|
|
Post by madmax on Oct 23, 2008 11:38:51 GMT
I'm only 5'6'' biggest fear is reaching the ground ;D you could grow your hair "big" like Max to compensate? ;D ;D ;D
|
|
|
Post by stewart on Oct 23, 2008 22:00:36 GMT
The seat will be moved back to the proper position.
|
|