|
Post by jonnyboy23 on Nov 26, 2012 14:08:59 GMT
hello chaps,
having some issue's with the indicators. they are being very hit and miss. sometimes they work and then sometimes they don't, when they do decide to work they don't flash either.
any ideas would be lovely, as im completely new to the largeframe world. i also need to maybe replace the speedo worm aswell, as the speedo doesn't work either.
thankyou.
|
|
|
Post by benjirixon on Nov 26, 2012 19:14:52 GMT
Double check - bulbs earth connections The wiring inside indicator switch Make sure the indicator units themselves are tight as they make the circuit
if all is ok then maybe the relay
as for speedo, same priciple as smallies
|
|
|
Post by triffid on Dec 4, 2012 21:38:55 GMT
good chance that it is your earthing, particularly if they are not flashing. Make sure there is no crap in the pin holes for the panels and that the end of the pins are clean. Check earthing leads are making contact with metal (not rust).
If you buy a new worm drive, make sure you get the right one as there are a lot out there for different models and often someone on fleabay will list it as fitting everything so buy from a reputable dealer.
|
|