|
|
Post by jeanshorts on Oct 7, 2012 0:54:28 GMT
|
|
|
|
Post by scooterslag on Oct 7, 2012 3:25:58 GMT
they're a good little pipe though If you want a bit more go out of a standard(ish) pipe then I'd opt for the standard ETS exhaust.
|
|
|
|
Post by firej on Oct 7, 2012 4:36:23 GMT
It has one less baffle in it then the Sito plus version of the banana pipe Sito made them for SIP is what i was told.
Not sure who made the FACO versions
|
|
|
|
Post by pk125sjim on Oct 7, 2012 9:13:43 GMT
Puzzling that its called the Road Banana but is labelled For Race Use Only  |
|
|
|
Post by waybackwhen88 on Oct 7, 2012 18:31:27 GMT
|
|
|
|
Post by Juan on Oct 7, 2012 20:55:13 GMT
Overpriced and shite.
I think that's written into Pinasco's charter.
|
|
|
|
Post by firej on Oct 8, 2012 7:27:33 GMT
The Pinasco pipe blows big waste of money I have seen some that the enamel cracked right off after some long hot rides...
The sito version is great for all around use on a mild set up.
|
|
|
|
Post by johnet3 on Oct 9, 2012 13:27:00 GMT
I have this pipe and it seems to go well enough on my DR135. The only thing I will question is the finish. It began surface rusting very quickly, even though I rarely ride in the wet and the scooter is garaged. After a few months I treated it to a coat of Blackfriars high temp matt black paint, but a year later I need to re-paint it. If anyone can recommend a bullet-proof finish for this I'd be pleased to hear about it.
|
|
|
|
Post by johnet3 on Oct 9, 2012 13:52:05 GMT
Oh and the reason that a "road pipe" would be for racing only is it's just a disclaimer. The laws in germany about modifying a vehicle can be very tight. I used to live there and I had an old Merc that failed its MOT because it had the wrong wheels. They were other original Merc wheels with the same stud pattern and rim size, but not on the official list of wheel models that could be mounted to that car!
|
|
|
|
Post by firej on Oct 12, 2012 9:57:36 GMT
You can buy do it yourself ceramic coating that work pretty good then you don't need to paint it anymore .
|
|
|
|
Post by habibi on May 8, 2020 12:16:48 GMT
Thread revival sorry if this topic has been covered.
I would like to buy a Sip Road Banana pipe for my small frame also would like to upgrade the motor to allow me to at least ride with the boys on their P2's
would a Sip Road be big enough to cope with mods up to a P2 speed about or would I be looking closer to a P150 speed with a Sip Road banana please advise
|
|
