|
Post by tony on Feb 17, 2008 19:05:03 GMT
looks good mate. You arent gonna fit the facias underneath then?
|
|
|
Post by breezer on Feb 17, 2008 19:09:52 GMT
No, for a few reasons.
the facias cover the less than perfect holes I cut. where I'd cut for the lights originally was too high up for the facias to line up with It's only gonna be a matt black ratter
|
|
|
Post by tony on Feb 17, 2008 19:12:28 GMT
i see.. well you cant put pikey nuts on a matt blacker! (well you shoudnt put em on anything unless your destination is zulu land and yer skirt is made of grass) ;D
|
|
|
Post by breezer on Feb 17, 2008 19:16:26 GMT
ooooooooooooooooooo wallah wallah wallah
|
|
|
Post by unreliablesc on Feb 17, 2008 19:17:43 GMT
Looks good, much better than the one I did a few years back. Check out the extra earth wire... ;D
|
|
|
Post by tony on Feb 17, 2008 19:20:26 GMT
that explains it... breezer's gona 80's,returned to his roots.. to his mytho poeikon past....
|
|
|
Post by Juan on Feb 17, 2008 19:34:10 GMT
Could be worse,it could've had "Style Council" muriels and 8" overs. ;D
|
|
|
Post by breezer on Feb 17, 2008 19:39:10 GMT
no hang on, I've got it...
Kajagoogoo theme...
Whaddya rekon lads?
|
|
|
Post by Juan on Feb 17, 2008 19:43:56 GMT
Nah,I'm thinking Showaddywaddy would bet better. Or the Flying Pickets.
|
|
|
Post by breezer on Feb 18, 2008 8:00:05 GMT
I like that actually URSC
matt black cutdowns rule
|
|
|
Post by unreliablesc on Feb 18, 2008 15:26:32 GMT
I like that actually URSC matt black cutdowns rule hey, this is no matt black, this is proper paint hammerite, hammered finish, painted with a brush ;D
|
|
|
Post by Juan on Feb 23, 2008 18:41:26 GMT
Hey,Jim! Just the thing to compliment your Pike y nuts. ;D
|
|
|
Post by breezer on Mar 2, 2008 10:59:11 GMT
|
|
|
Post by hank on Mar 2, 2008 13:22:43 GMT
can tell we are having good weather, what spray did you use? hammerite satin or just "any old rattlecan" satin?
|
|
|
Post by breezer on Mar 2, 2008 17:44:30 GMT
Emptied garage and did it in there.
garage now covered in paint dust!
Used "any old satin" rattle can. Also got some hammerite red for forks and rims.
Hammerite paint is really watery, needs 3-4 coats and then its like glue. Sure it will harden (in time!) okay, but for a while it's quite soft.
Also IT RUNS LOADS EASIER than normal primer and top coat. Can see why people told Ozzy not to use it.
|
|
|
Post by adspeed on Mar 12, 2008 20:55:24 GMT
Hoping to get it done for the weekend mate......might be pushing it but I'll try me best
|
|
|
Post by unreliablesc on Mar 12, 2008 21:16:46 GMT
Hoping to get it done for the weekend mate......might be pushing it but I'll try me best Very nice porting mate. Polini? What else fun are you putting in there?
|
|
|
Post by breezer on Mar 12, 2008 21:39:30 GMT
WOW!
|
|
|
Post by breezer on Mar 12, 2008 21:41:22 GMT
Mate, seriously no rush, got plenty to be working on with it at the moment - whenever is fine, especially if it's THAT good! Plus bought the "kids" a Wii the other week so no cold evenings in the garage for me recently
|
|
|
Post by tony on Mar 12, 2008 22:07:09 GMT
nice ports mate-you done well to do that with that mallet.. ;D
|
|