|
Post by boreham on May 25, 2019 11:31:20 GMT
Treated the 50 special project to a new Parmakit SP8 variable ignition kit (New) but despite several attempts its totally dead with no spark. I have just wired the ignition in isolation for now to test so only the 3 wires to attach, tested the stator and getting 290 ohms, kicking it over getting upto 40v AC but no spark. Also removed the variable cdi unit and wired direct but still nothing?
What are the suggestion for checking the coil, as its the race kit it comes with the round coil.
Any ideas?
|
|
|
Post by jonnysnatchsniffer on May 30, 2019 15:14:47 GMT
if like the vespatronic stator it come covered in some kind of black finishing, i like to lightly file this off in the positions the stator fixes to and the same on top, this will give a much better earth. if i were you id just be looking at the instructions again to double/tripple check that all the stuff is wired correctly and soundly connected, and then get the hump. have you got a link to this contraption?
|
|