|
Post by bikegrim on Nov 24, 2017 10:19:26 GMT
Frame jigged by John Vespaframejig Dry build chassis before adding fibre legshield, belly pan and rear bubble welding and bracing to be done once its been dipped and removed 2 ton of filler.
|
|
|
Post by scooterist on Nov 24, 2017 16:58:33 GMT
Nice one G
looking forward to this build
|
|
|
Post by tzsteve on Nov 24, 2017 17:14:01 GMT
keep the photos coming
|
|
|
Post by potatopl on Nov 25, 2017 11:37:58 GMT
|
|
|
Post by bikegrim on Nov 25, 2017 12:05:49 GMT
Is it a lardy engine that got blurred out? How very dare you ! It’s not the engine I’m using as that is now sold so I blurred it out. Engine in this is top secret
|
|
|
Post by tzsteve on Nov 25, 2017 15:32:27 GMT
say no more
|
|
|
Post by bikegrim on Nov 25, 2017 18:50:47 GMT
Is it a lardy engine that got blurred out? Engine in this is top secret - for now!
|
|
|
Post by scooterist on Nov 25, 2017 22:34:03 GMT
Malossi 210.... ? Noooooo
|
|
|
Post by bikegrim on Nov 26, 2017 13:21:28 GMT
😉
|
|
|
Post by davet on Nov 26, 2017 20:38:35 GMT
I like the suspense.
|
|
|
Post by bikegrim on May 7, 2018 8:39:01 GMT
Not much done on this but I picked a nice used Big Bertha on FB at a very reasonable price. I also got a secondhand 34mm carb for it which has spurred me on a bit.
|
|
|
Post by henri on May 7, 2018 8:55:59 GMT
theres a guy in barnsley now doing fiberglass rear ends/leggies-floors/muddys , could put you in touch if you like .H
|
|
|
Post by bikegrim on May 7, 2018 9:18:07 GMT
Thanks H, seen him on FB. I’ve got leggies and belly pan already from the previous project. I will need a rear bubble so if he’s doing a good price I’d have a word with him.
|
|
|
Post by henri on May 7, 2018 11:25:59 GMT
seeing him tuesday ,will ask n put in a word for ya . H
|
|
|
Post by a3aan on May 7, 2018 15:38:44 GMT
plc corse makes very nice polyester rear ends for all types, around 250euros i think, thats a bit less in pounds.
a3aan
|
|
|
Post by terjee on May 7, 2018 20:54:24 GMT
I want to put fiberglass crimaz parts but do not know Hvere to weld in brases and stuff, i like to se some build.
|
|
|
Post by a3aan on May 8, 2018 16:34:13 GMT
i ll try update my project after this week with all the work i did to fit mine, isnt so hard to figure out
a3aan
|
|
|
Post by ginch on May 9, 2018 3:07:33 GMT
When you replace the legshields with fibreglass, how do you stop the frame twisting? I would think the metal ones provide a bit of restraint for the steering tube.
|
|
|
Post by henri on May 9, 2018 7:36:12 GMT
you only cut off the metal outboard of the centre tunnel ginch ,leaves the box section for strength . grim ive messaged ya . H
|
|
|
Post by bikegrim on May 10, 2018 15:21:08 GMT
Replied H
|
|